Neuropixels DAQ cable

>

>

Neuropixels DAQ cable

No items found.

No items found.

Neuropixels DAQ cable

Information

Neuropixels DAQ cable for connecting the system to the commutator.
Contact us for custom length option.

‍

‍

Configuration

Resources

Overview

Frequently bought with

XDAQ CORE2

The XDAQ CORE2 is an all-new, redesigned entry-level XDAQ model that many labs will find to be a reliable workhorse, offering built-in stimulation capabilities and Neuropixels support right out of the box.

XDAQ ONE+

The XDAQ ONE+ is an all-new, redesigned DAQ powerhouse, offering the highest capacity for recording, switchable stimulation, and Neuropixels experiments.

XDAQ AIO

The AIO is the top-tier XDAQ model, offering enhanced out-of-the-box support for advanced capabilities such as optogenetics and synchronized multichannel video capture, meeting the demands of modern neuroscience research.

Dual Mode Commutator PRO

Neuropixels Commutator PRO

KonteX Neuropixels Cable

KonteX Neuropixels 34AWG cable 1 M with JST connector for KonteX headstages

IMU Cable

IMU cable for Commutator PRO

KonteX Neuropixels Connectivity Bundle for IMEC Headstages

KonteX Neuropixels 34AWG cable with JST connector and Omnetics adapter bundle for IMEC headstages

IMU Sensor

Replacement IMU sensor module (Included for -I model)

HDMI A to D Cable

X-Headstage™ Removal Tool

This is a custom-made flat-head removal tool with tips specifically designed for both the X3 and X6 headstage interfaces.

X-Headstage™ Armor Screw Set

These are the screws set used in the S-Armor. 3mm-standard-length / 5mm extended-length screws used when additional remap or cycle extender boards are placed between the headstage and the EIB or adapter

X3 Headstage 64ch Impedance Test Module

Use this module with dummy test loads, ranging from kOhm to MOhm in R/C values, to test the impedance functionality of the X3 headstages.

X3 Headstage Stimulation Test Module

Use this module with a dummy 1kOhm resistive load to verify the stimulus waveform generated by the X3SR headstages.

You may also like

KonteX Neuropixels Cable

KonteX Neuropixels 34AWG cable 1 M with JST connector for KonteX headstages

IMU Cable

IMU cable for Commutator PRO

KonteX Neuropixels Connectivity Bundle for IMEC Headstages

KonteX Neuropixels 34AWG cable with JST connector and Omnetics adapter bundle for IMEC headstages

KonteX Neuropixels Cable

KonteX Neuropixels 34AWG cable 1 M with JST connector for KonteX headstages

IMU Cable

IMU cable for Commutator PRO

KonteX Neuropixels Connectivity Bundle for IMEC Headstages

KonteX Neuropixels 34AWG cable with JST connector and Omnetics adapter bundle for IMEC headstages

IMU Sensor

Replacement IMU sensor module (Included for -I model)

HDMI A to D Cable

X-Headstage™ Removal Tool

This is a custom-made flat-head removal tool with tips specifically designed for both the X3 and X6 headstage interfaces.

X-Headstage™ Armor Screw Set

These are the screws set used in the S-Armor. 3mm-standard-length / 5mm extended-length screws used when additional remap or cycle extender boards are placed between the headstage and the EIB or adapter

X3 Headstage 64ch Impedance Test Module

Use this module with dummy test loads, ranging from kOhm to MOhm in R/C values, to test the impedance functionality of the X3 headstages.

X3 Headstage Stimulation Test Module

Use this module with a dummy 1kOhm resistive load to verify the stimulus waveform generated by the X3SR headstages.